Industrial wood with international name is Wood-Based Panel, which is a very popular material used today thanks to its convenience and low cost compared to natural wood. So how to distinguish the types of industrial wood? Let's find out details with Long Dat Corp through the following article!
Vietnam plywood is made up of many thin layers of wood ~1mm pressed perpendicular to each other with specialized glue.
Properties: No cracking, no shrinkage, less termites, high strength. There are ordinary plywood, water-resistant plywood covered with film, glued. The surface is usually not smooth
Common thickness: 3mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 25mm
Application: Rough processing of home, office, advertising furniture, core for veneer surface. Water-resistant type for copha, outdoor reinforcement…
MDF is essentially a normal natural wood, finely ground, mixed with specialized glue and reinforced according to specifications.
Properties: No cracking, no shrinkage, relatively soft, weak bearing, easy to process. The surface has a high smoothness. The moisture-resistant type usually has a slightly green core
Common thickness: 3mm, 4mm, 5mm, 6mm, 9mm, 12mm, 15mm, 17mm, 18mm, 20mm, 25mm
Applications: Rough processing of furniture for home, office, advertising, as reinforcement for coating MFC, PVC ... as a very good finishing layer for a variety of finishing materials including paints of all kinds. MDF is widely used in the production of tables, beds, wardrobes, home furniture, office furniture.
Melamine-coated chipboard (this wood can also be considered a branch of PB) There are trees grown specifically to produce this type of MFC.
These plants are harvested for a short period of time, without the need for large trees. People chopped this tree and also combined with glue, pressed to create thickness. Absolutely do not have to use trash and waste wood as people think. Surface finish can be applied PVC coated or wood grain paper for beauty then coated with a protective finish to resist moisture and scratches.
Advantages: Easy to construct, used for simple projects, large wood surface size.
Cons: It is a laminated wood with a combination of wood chips and glue, so it is very afraid of water. In contact with water, it is often swollen.
Often used as tables and chairs, cabinets in the interior
MFC laminate has a wide range of applications, especially in the field of office furniture. Currently, 80% of home and office furniture uses MFC wood to make because the price is reasonable, the colors are extremely diverse and rich. For office and residential furniture, only standard MFC wood should be used, and for wet spaces and areas such as Toilets, Kitchen cabinets, Toilet walls, toilets, it is recommended to use anti-skid boards. moisture V313.
Structure: Ordinary natural wood, finely ground, mixed with specialized glue and reinforced with very high pressure.
Properties: No cracking, no shrinkage, very hard, water resistant, heat resistant quite well.
Common thickness: 3mm, 6mm, 9mm, 12mm, 15mm, 17mm, 18mm, 20mm, 25mm
Application: Processing rough parts of high-class furniture, making the core of laminate flooring ...
Structure: Small wooden slats (usually rubber wood, pine wood, oval wood, acacia wood, cinnamon wood, truffle wood) using technology to put together into panels
Properties: Very close to the characteristics of natural wood
Common thickness: 12mm, 18mm
Application: Producing home and office furniture.
As a thin layer of natural wood, used as the surface of wood products. Veneer wood is produced from thinly sliced from natural wood such as oak or oak. So the surface of wood veneer is very beautiful and natural. The inner layers of wood create thickness, then industrial wood can be used for economic purposes. When processing wooden products, workers often call the wood used as veneer. Including industrial wood covered with veneer.
Advantages: Easy to process, can be used for difficult projects, natural and beautiful wood grain.
Cons: As a thin layer of wood as the surface, it is easy to be scratched and peeled. Short usage time.
Often used as walls, tables and chairs, cabinets in luxury interiors. To withstand water, moisture should be combined with plywood.
Above is a summary of the most commonly used industrial woods on the market today, Long Dat Corp hopes to help you get more useful information to serve your industrial wood orders.
You can also refer to the list of industrial wood products at Long Dat Corp right at our website such as Vietnam plywood, laminated wood ...
Thank you very much !
LongDat Import Export and Production Corporation
Address: No. 6, lane 95, Ho Tung Mau street, Mai Dich ward, Cau Giay district, Hanoi city.
Office: No. 6, lane 76/8, Duy Tan street, Cau Giay district, Hanoi city.
Warehouse: Hamlet Bai, Uy No commune, Dong Anh district, Hanoi city.
Factory: Zone 9, Vo Lao commune, Thanh Ba district, Phu Tho province.
Copyright © 2021 - LONGDAT IMPORT - EXPORT AND PRODUCTION CORPORATION - All rights reserved. Design by i-web.vn